SELECTION OF THE LEVELER TYPE AND JUSTIFICATION OF ITS MAIN DIMENSIONS WHEN WORKING ON SMALL CONTURAL AREAS
Keywords:
Small contour, base levelers, leveling level, unevenness, maneuverability, long base leveler, irrigated soil softenerAbstract
In the article, due to the low efficiency of existing land leveling
machines in small-contour cultivated areas (up to 3 hectares), the results of choosing
an effective leveling machine(П-2,8А, П-4, ПА-3 and ППА -3,1 and others) and
justifying its main dimensions are presented. The advantages and disadvantages of the
selected PU-14 ground leveler are identified. As a result of the research, a ground
leveler with an improved surface, which differs from the existing leveler in terms of
leveling technology (smoothing at the same time as cutting the soil layer by layer),
quality of work and less effort, was created. It is based on the optimal dimensions of
the ground leveler with improved roof. Using the improved leveler in small areas
increases productivity by 1.6 times compared to the existing leveler, reduces power
consumption by 1...7%
References
1. Khasanov, I., Kuchkarov, J., Nuriddinov, H. Efficiency of irrigated land
meliorativity through the usage of fixing softening disk device to base leveler. IOP
Conference Series: Materials Science and Engineering, 2020, 883(1), 012174.
2. Akhmedzhanov, M.A. Operational planning of irrigated lands in arid zones.
Moscow: “Kolos”, 1982. – p.148
3. Akhmedzhanov, M.A. Comprehensive research and development of
technology and tools for operational planning of irrigated lands. Tashkent: Fan
Publishing, 1984. – p.143
4. Samsonova, N.P. Planning of irrigated areas. Selkhozgiz, Moscow: 1952. –
p. 23
5. Batrakov, Yu.G., et al. Planning of irrigated lands.M: Kolos Publishing, 1964. – p.199
6. Kim, G.N. Research and justification of main parameters of a long-base
leveler with a ripper. PhD dissertation in technical sciences, Yangiyul, 1972. – p.170
7. Khikmatov, P.G. Research on quality and technological indicators of a long
base leveler to justify optimal working width and movement speed. PhD dissertation
in technical sciences, Yangiyul, 1978. – p.147
8. Babadzhanov, I.A. Justification of type and parameters of a leveler with a
hydromechanical control system for the working body. PhD dissertation in technical
sciences, Yangiyul, 1985. – p.162
