WATER EROSION TREATMENT LINEAR-VERTEBRATE PLUG

Authors

  • Rashidov Nurbek son of Shermamat Author
  • Temirov Isroil Gulomovich Author

Abstract

Today, the development and application of soil treatment machines with high 
soil protection energy-resurstejamkor and work performance are at the forefront. 31% 
of  the  land  is  affected  by  water  erosion,  and  34%  by  wind  erosion,  and  60  crore 
annually.considering that more than a ton of the fertile layer of soil is washed away, 
energy-resource-intensive soil treatment, which protects the soil from water and wind 
erosion, is one of the important tasks for the development of machines and weapons. 
Sufficiently insoluble soil particles in water contribute to the occurrence of water and 
wind  erosion,  the  transformation  of  the  soil  surface  into  small  particles  and  the 
destruction of soil residues,  it leads to a decrease in its ability to collect moisture. 
Erosion by water and wind absorbs the fertile part of the soil and accelerates the onset 
of soil drought. The result was a blunderbuss with a butt structure, a shaped warhead, 
and the ability to withstand a load [1,2]. 
Data and their assumption: as you know, lalmikor farming occupies an important 
place in the economy of Uzbekistan. In our republic, lalmikor farmable soils are worth 
2 million. 130,000 hectares. The area of the Lalmikor maydans is 801.45 thousand 
hectares, including the maydans located in the Crimea The Reserve (235.5 thousand 
ha.), Jizzakh (204.5 thousand ga.) and Samarkand (193.9 thousand ha.) per province. 
Lalmi farming is done on sloping land in most HAVs[1].  

References

Literary works:

1. Махсудов Х.М. Эрозия почв аридной зоны Узбекистана. – Ташкент: Фан,

1989. – 168 с.

2. Кленин Н.И., Сакун В.А. Сельскохозяйственные и мелиоративные

машины. – М.: Колос, 1994. – 751 с.

3. F.M.Mamatov, F.U.Karshiev, N.B.Ravshanova, S.Zh.Toshtemirov,

U.Kodirov, N.Sh.Rashidov, G.D.Shodmonov, N.I.Saidov, M.F.Begimkulova,

A.Ismatov,. Engineering Optimisation of Combined Soil Preparation for Ridge-Based

Peanut Production and Residue Biodegradation. Technologies 2026,14,

https://doi.org/10.3390/technologies14040203.

4. F.Mamatov, Kh.Fayzullaev, Sh.Kurbanov, N.Ravshanova, N.Rashidov.

Physical and mechanical properties of rain fed soils and morphological characteristics

of watermelon. E3S Web of Conferences 703, 03014 (2026)

https://doi.org/10.1051/e3sconf/202670303014 AEES2025

5. Мирзаев Б.С., Маматов Ф.М. Противоэрозионные влагосберегающие

технологии и технические средства обработки почвы в условиях Узбекистана//

Молодой учёный. – Чита, 2013. – № 10. – С. 263-265.

6. Mamatov F., Aldoshin N., Mirzaev B., Ravshanov H., Qurbonov Sh. and

Rashidov N. Development of a frontal plow for smooth, furless plowing with cutoffs//

IOP Conf. Series: Materials Science and Engineering 1030 (2021) 012135. – United

Kingdom, 2021. doi:10.1088/1757-899X/1030/1/012135.

7. Mamatov F., Umurzakov U., Mirzaev B., Rashidov N., Eshchanova G and

Avazov I. Physical-mechanical and technological properties of eroded soils // E3S

Web of Conferences 264, 04065 (2021). – France, 2020.

doi.org/10.1051/e3sconf/202126404065.

8. Khudayarov B., Mardonov Sh., Rashidov N., Sodikov X and Baratov D.

Ripper for processing slope field // E3S Web of Conferences 264, 04034 (2021). –

France, 2021. doi.org/10.1051/e3sconf/202126404034.

9. Mamatov F., Aldoshin N., Mirzaev B., Ravshanov H., Qurbonov Sh. and

Rashidov N. Development of a frontal plow for smooth, furless plowing with cutoffs

// IOP Conf. Series: Materials Science and Engineering 1030 (2021) 012135. – United

Kingdom, 2021. doi:10.1088/1757-899X/1030/1/012135.

10. Ravshanov H, Babajanov L, Kuziyev Sh, Rashidov N, Kurbanov Sh. Plough

hitch parameters for smooth tail // IOP Conf Series: Materials Science and Engineering

883(2020) 012139. – United Kingdom, 2020. doi:10.1088/1757-899X/883/1/012139.

11. Mamatov F., Umurzakov U., Mirzaev B., Rashidov N., Eshchanova G and

Avazov I. Physical-mechanical and technological properties of eroded soils // E3S Web

of Conferences 264, 04065 (2021). – France, 2021.

doi.org/10.1051/e3sconf/202126404065.

12. Khudayarov B., Mardonov Sh., Rashidov N., Sodikov X and Baratov D.

Ripper for processing slope field // E3S Web of Conferences 264, 04034 (2021).

– France, 2021. doi.org/10.1051/e3sconf/202126404034.

13. F.M.Maмatov, M.Kh.Shomirzaev, Y.Rajabov, I.G.Temirov,

D.Sh.Chuyanov,. Combined machine for pre Parameters of the deep loader of the mole

drainage gun // IOP Conference Series: Earth and Environmental Science 1231 (1),

012048.

14. F.М.Maмatov, K.Ravshanov, S.Mamatov, I.Temirov, D.Kuvvatov,

Combined machine for preparing the soil for re-sowing crops // IOP Conference Series:

Earth and Environmental Science 868 (1), 012066.

15. I.Temirov, K.Ravshanov, K.Fayzullaev, S.Ubaydullaev, U.Kodirov.

Development of a machine for preparing the soil for sowing melons under the film //

IOP Conference Series: Materials Science and Engineering 1030 (1), 012169.

16. F.Маmatov, I.Temirov, S.Оchilov, D.Chorieva, D.Rakhmatov, Substantiation

the technology and parameters of the “paraplau” type soil dredger for a two-tier plow

// E3S Web of Conferences 304, 0301.

17. S.Kurbanov, I.Temirov, L.Babajanov, Technological basis of rotation of body

with polygon // E3S Web of Conferences 401, 04050.

18. S.Kurbаnov, I.Temirov, Y.Khashimova, P.Berdimuratov, S.Yuldoshev,.

Pulling resistance of the front plow cornercutter // E3S Web of Conferences 383,

04012.

19. F.M.Maмatov, M.Kh.Shomirzaev, Y.Rajabov, I.G.Temirov,

D.Sh.Chuyanov,. Parameters of the deep loader of the mole drainage gun // IOP

Conference Series: Earth and Environmental Science 1231 (1), 012048.

20. Mamatov, F.M., Rajabov, Y., Temirov, I.G., Chuyanov. Parameters of the

Ripper-Mole Knife // AIP Conf. Proc. 2024, 2969, 060025-1–060025-4;

https://doi.org/10.1063/5.

Published

2026-06-22

How to Cite

Rashidov Nurbek son of Shermamat, & Temirov Isroil Gulomovich. (2026). WATER EROSION TREATMENT LINEAR-VERTEBRATE PLUG . Ta’lim Innovatsiyasi Va Integratsiyasi, 71(2), 271-274. https://journalss.org/index.php/tal/article/view/34910