CALCULATION OF THE RESISTANCE OF A LINEAR-STEPPING PLUG WITH A CUT SPHERICAL DISK
Keywords:
Keywords: slope, cross section, spherical disk, plug, traction resistance disk blade, casings, soil dredging.Abstract
Abstract: The total traction resistance of linear-step plow with truncated
spherical disc was determined as the sum of the traction resistances of disc blades,
housings, soil deepeners and truncated spherical discs.
References
1. Клёнин Н.И., Сакун В.А. Сельскохозяйственные и мелиоративные
машины. – Москва: Колос, 1980. – 671 с.
2. Синеоков Г.Н., Панов И.М. Теория и расчет почвообрабатывающих
машин. – М., Машиностроение, 1977. – 327 с.
3. Лобачевский Я.П. Разработка технологических основ создания
фронтальных плугов для гладкой вспашки: Дисс. ... кан. тех. наук. – Москва:
МГАУ,1987. – 245 c.
4. Лобачевский Я.П. Технологии и технические средства для гладкой
вспашки. – Москва: МГАУ, – 2001. – 99 с.
5. Шаров В.В. Обоснование основных параметров роторного плуга для
гладкой вспашки: Автореф.дисс. … канд. техн. наук. – М., 1986. – 196.
6. Труфанов В.В. Глубокое чизелевание почвы. – М.: Агропромиздат, 1989. –
7. F.M.Mamatov, F.U.Karshiev, N.B.Ravshanova, S.Zh.Toshtemirov,
U.Kodirov, N.Sh.Rashidov, G.D.Shodmonov, N.I.Saidov, M.F.Begimkulova,
A.Ismatov,. Engineering Optimisation of Combined Soil Preparation for Ridge-Based
Peanut Production and Residue Biodegradation. Technologies 2026,14,
https://doi.org/10.3390/technologies14040203.
8. F.Mamatov, Kh.Fayzullaev, Sh.Kurbanov, N.Ravshanova, N.Rashidov.
Physical and mechanical properties of rain fed soils and morphological characteristics
of watermelon. E3S Web of Conferences 703, 03014 (2026)
https://doi.org/10.1051/e3sconf/202670303014 AEES2025
9. Мирзаев Б.С., Маматов Ф.М. Противоэрозионные влагосберегающие
технологии и технические средства обработки почвы в условиях Узбекистана//
Молодой учёный. – Чита, 2013. – № 10. – С. 263-265.
10. Mamatov F., Aldoshin N., Mirzaev B., Ravshanov H., Qurbonov Sh. and
Rashidov N. Development of a frontal plow for smooth, furless plowing with cutoffs//
IOP Conf. Series: Materials Science and Engineering 1030 (2021) 012135. – United
Kingdom, 2021. doi:10.1088/1757-899X/1030/1/012135.
11. Mamatov F., Umurzakov U., Mirzaev B., Rashidov N., Eshchanova G and
Avazov I. Physical-mechanical and technological properties of eroded soils // E3S
Web of Conferences 264, 04065 (2021). – France, 2020.
doi.org/10.1051/e3sconf/202126404065.
12. Khudayarov B., Mardonov Sh., Rashidov N., Sodikov X and Baratov D.
Ripper for processing slope field // E3S Web of Conferences 264, 04034 (2021). –
France, 2021. doi.org/10.1051/e3sconf/202126404034.
13. Mamatov F., Aldoshin N., Mirzaev B., Ravshanov H., Qurbonov Sh. and
Rashidov N. Development of a frontal plow for smooth, furless plowing with cutoffs
// IOP Conf. Series: Materials Science and Engineering 1030 (2021) 012135. – United
Kingdom, 2021. doi:10.1088/1757-899X/1030/1/012135.
14. Ravshanov H, Babajanov L, Kuziyev Sh, Rashidov N, Kurbanov Sh. Plough
hitch parameters for smooth tail // IOP Conf Series: Materials Science and Engineering
883(2020) 012139. – United Kingdom, 2020. doi:10.1088/1757-899X/883/1/012139.
15. Mamatov F., Umurzakov U., Mirzaev B., Rashidov N., Eshchanova G and
Avazov I. Physical-mechanical and technological properties of eroded soils // E3S Web of Conferences 264, 04065 (2021). – France, 2021.
doi.org/10.1051/e3sconf/202126404065.
16. Khudayarov B., Mardonov Sh., Rashidov N., Sodikov X and Baratov D.
Ripper for processing slope field // E3S Web of Conferences 264, 04034 (2021).
– France, 2021. doi.org/10.1051/e3sconf/202126404034.
17. F.M.Maмatov, M.Kh.Shomirzaev, Y.Rajabov, I.G.Temirov, D.Sh.Chuyanov,.
Combined machine for pre Parameters of the deep loader of the mole drainage gun //
IOP Conference Series: Earth and Environmental Science 1231 (1), 012048.
18. F.М.Maмatov, K.Ravshanov, S.Mamatov, I.Temirov, D.Kuvvatov, Combined
machine for preparing the soil for re-sowing crops // IOP Conference Series: Earth and
Environmental Science 868 (1), 012066.
19. I.Temirov, K.Ravshanov, K.Fayzullaev, S.Ubaydullaev, U.Kodirov.
Development of a machine for preparing the soil for sowing melons under the film //
IOP Conference Series: Materials Science and Engineering 1030 (1), 012169.
20. F.Маmatov, I.Temirov, S.Оchilov, D.Chorieva, D.Rakhmatov, Substantiation
the technology and parameters of the “paraplau” type soil dredger for a two-tier plow
// E3S Web of Conferences 304, 0301.
21. S.Kurbanov, I.Temirov, L.Babajanov, Technological basis of rotation of body
with polygon // E3S Web of Conferences 401, 04050.
22. S.Kurbаnov, I.Temirov, Y.Khashimova, P.Berdimuratov, S.Yuldoshev,.
Pulling resistance of the front plow cornercutter // E3S Web of Conferences 383,
04012.
23. F.M.Maмatov, M.Kh.Shomirzaev, Y.Rajabov, I.G.Temirov,
D.Sh.Chuyanov,. Parameters of the deep loader of the mole drainage gun // IOP
Conference Series: Earth and Environmental Science 1231 (1), 012048.
24. Mamatov, F.M., Rajabov, Y., Temirov, I.G., Chuyanov. Parameters of the
Ripper-Mole Knife // AIP Conf. Proc. 2024, 2969, 060025-1–060025-4;
